Amaryllis care

Growing amaryllis (Hippeastrum) at home: The basics

WHAT’S IN A NAME?

The common name amaryllis is often applied to the commonly grown hybrids of the (currently recognized) 111 species of Hippeastrum. Originally, several modern genera from both the Old and New World were classified under the scientific name Amaryllis. In the 19th century, botanist William Herbert proposed the creation of several new genera to classify and distinguish those differing from the South African Amaryllis belladonna, which he accepted as the type species for the genus. His publications were contested by botanists convinced that the first described Amaryllis was what we now call Hippeastrum puniceum. This led to a long period of nomenclatural confusion. The dissension among botanists was formally ended at the 1987 meeting of the 14th International Botanical Congress in Berlin. There, the South African species was officially conserved as the generic Amaryllis, which currently consists of only two species, Amaryllis belladonna and A. paradisicola. Typically these are cultivated outdoors in Mediterranean climates under common names such as “naked ladies,” “belladonna lily,” or “March lily”. Since popular cultivation of Hippeastrum hybrids began long before the nomenclature was settled; the common name amaryllis has remained with them. Today they are popular as cut flowers and as forced bulbs for the winter holidays, especially for Christmas in the Northern Hemisphere. A controversial 2018 proposal to place several other genera within Hippeastrum has not gained broad acceptance.

I JUST GOT AN AMARYLLIS BULB, NOW WHAT?

Amaryllis bulbs are often given as holiday gifts, either bare-root or in the form of kits including pots and soil media. These bulbs have typically been produced in the Netherlands, Israel, South Africa, Peru, or Brazil and prepared in such a way that they will produce flowers within weeks of being received. While many people dispose of the plants after the show is over, it is quite possible to regrow the plant for bloom in subsequent years.

STARTING OUT

Upon receipt of a bulb, it is best to pot it up immediately; however it may be stored for several weeks at cool (50-60°F/10-16°C) temperatures if kept dry. The more live, fleshy roots attached to the bulb the better; they will enable the plant to take water from the soil, not just from the bulb itself. Dry, dead roots should be removed since they will decompose anyway. It is essential to provide your amaryllis with a pot and soil that ensures good drainage. If a gift box kit includes a pot without drainage, put drain holes in it, or use another pot. Many of the commercially prepared houseplant potting soils will suffice; if they are very high in organic matter or contain moisture regulating compounds add 1/3 or so sharp sand, perlite, pumice, or some other aerating aggregate by volume, particularly if choosing a plastic pot. A clay pot offers more counterweight for the top-heavy plants and permits more air exchange to the roots, and is better for those who tend to over water. Plastic is less expensive, easier to sanitize and will work better for those who under water more often. Choose a pot about 2-3”/5-7.5 cm larger in diameter than the bulb itself. Partly fill the pot with soil and place the bulb in the pot. Adjust the bulb height as you fill and gently firm the media around the bulb so that the soil line is about ¾”/2 cm below the pot rim and the top 1/3 or so of the bulb is above the soil line. The practice of keeping the “neck” of the bulb well above the soil line prevents diseases associated with moisture at the growing point. In nature, some terrestrial species grow with bulbs being completely underground, while the epiphytic and semi-epiphytic species grow with most of their bulbs exposed. The hybrids are generally pretty flexible.

BRING ON THE FLOWERS!

Now that your bulb is potted, water it in well to settle the soil around the bulb. Place the pot in a warm location (ideally 68-78°F/20-26°C) and keep on the dry side. Cool temperatures and excess moisture not only discourages root initiation, but can lead to rotting of the bulb and roots. Be patient! While some bulbs may already be sprouting upon purchase, others may take several weeks to commence growth. Whether bloom scapes or leaves emerge first, increase watering commensurate with growth, keeping the plant just moist through the flowering period. Bright light (including direct sun) and frequent turning of the pot will insure sturdy, straight scapes, otherwise staking may be required. Once flowering begins, the plant may be moved to a cooler location to help flowers last longer. Remove individual flowers after they fade, and cut the bloom scape to the neck of the bulb when the last flower is done. Depending on bulb size and variety you may get two or more scapes, either simultaneously or over several weeks’ time. Hippeastrum make excellent cut flowers, and last even longer than on the plant itself. Fresh flowers broken off of the scape often keep for days with no water!

CAN I GET IT TO BLOOM AGAIN?

Aftercare
When flowering has ceased and foliage is being produced it is time to build the strength of the plant for next year’s bloom. Regular watering is now coupled with fertilizing. Follow label directions on a fertilizer made for flowering houseplants, bearing in mind that over-feeding a plant without adequate sunlight can produce large, but weak leaves, and may damage the roots. For sturdier growth, the plants should be moved outdoors when cold weather has passed. Choose a spot in full sun or afternoon shade, depending on your climate. In hot summer climates, try to buffer the roots from excessive heat and drying. This can be done by partly plunging pots into the garden, or “sleeving” the pot into a larger outer pot. You will be rewarded with a handsome plant bearing a fan of large strap-shaped leaves. Pest insects (aphids can vector viruses), slugs, etc. may need to be controlled, the downside of growing outdoors.

Programming for Rebloom
Since most Hippeastrum are actually spring bloomers by nature, you probably won’t see flowers as early as December unless you force the dormancy process quite early. Allowing a longer growing season may yield a bigger, healthier bulb, so take that into consideration. Several weeks before expected frost, withhold water and fertilizer (placing the pot on its side is a common practice). The leaves will slowly yellow and begin drying off, sending carbohydrates to the bulb. Some specimens are slower to cooperate than others. Before freezing temperatures arrive, bring the plant indoors and remove the remaining foliage (even if green), trimming it to the neck with a sharp knife or shears. If working with more than one amaryllis bulb at a time, thoroughly clean and sanitize the cutting blade between each to prevent the potential spread of viruses and other pathogens. This is the most convenient time to repot if necessary. Storing the bulb in a cool location (50-62°F/10-16°C) will induce a forced dormant state that allows flower scapes deep in the bulb to begin to develop, while foliage growth is suppressed. In the trade this is called “programming”. After 2-3 months you may notice a bloom scape emerging from the bulb, but even if you don’t, give it an initial watering. Once the emergence of a flower scape or foliage is noticed, move to a warm and bright location as before and prepare to have your winter doldrums brightened by the spectacular blooms of your own amaryllis!

*These guidelines represent a basic set of concepts based on growing in a temperate climate in the Northern Hemisphere, YMMV! Hybrid amaryllis bulbs are actually pretty resilient and many people succeed with them using varied techniques. Species cultivation often requires more skill in determining watering regimens, temperature preferences, specific soil and dormancy requirements and so on. Proceed at your own risk…of a new addiction!

18 Comments on “Amaryllis care

  1. Help would be appreciated about growing from seed. I have seen some hints about “floating” them and then transplanting. Is this necessary? Also, how long do you let the seed “dry” or lie dormant before planting? I have some capsules about ready to pop, and need to know whether to store or plant right away. If planting directly (I plan to use pure coir to start — I live in a very dry climate), how deep should the seeds be covered?
    Many thanks!

    • Hi, Meredith,
      Hippeastrum seed are quite easy to germinate. When the pods begin to split, I cut them and drop them into a paper lunch bag. Within a few days the seed will spill out; they are ready for planting immediately. You can hold them for a few months in dry conditions if necessary.

      The floating method is used to gauge viability for a large quantity of seed, or to test old seeds…for you it introduces an extra step and a delicate transplanting operation. Just sow on your media and sift a fraction of an inch/centimeter over them and firm them in. Putting the seed flat in a plastic bag or container will keep the humidity high and assist in germination. You should have grass-like seedlings appearing within 2-3 weeks! Once they are done germinating you can acclimate them to normal humidity levels. Good luck!

  2. General comment- an overnight soak in warm water increases root growth amazingly well. This was a tip from John Vandenberg years ago when I was a commercial grower

    • Thanks! I have sometimes done a brief soak, but overnight would lead to soaking in water that is too cold for me.

  3. Hi, Lately I have not been able to view the Photo Library. Is there a problem with the website? Thank you.

    • Hi Tony,
      My apologies for the current situation. A solution is around the corner. Thank you for using the site, and I promise it will be up and running normally asap!

    • Patricia, First re-examine your cultural conditions, wet and cool are favorable to red blotch (Peyronellaea curtisii) and not amaryllises. Many physical injuries cause a reaction that turns leaves red, but if you are sure you have this fungus try spraying with a fungicide containing thiophanate-methyl as active ingredient. You may need several applications during the growing season. Repot in fresh media and remove the outermost dry bulb tunic to prevent re-infection from spores on those surfaces. Warmth, excellent air exchange and air circulation help prevent this difficult fungal pathogen from returning.

  4. emaryllis – can you provide a timeline of when do you start withholding water and begin the programming process?

    Also, if one lives in an apartment and has limited ability to provide the cool temperatures, is it better to withhold water later – in September perhaps or even later? Do you have any suggestions for the apartment dweller to find a cool spot?

    I have begun withholding water now — mid August – and may have to just leave the pots on my windowsill as I can’t think of another place that might be cooler. But I am worried that I started too early.

    Thanks, E!

    • Hmmmm Derya, it sounds like you have issues common to many an indoor gardener. I would continue to grow your amaryllis for at least another few weeks. August drying down is aimed at those looking for December blooms, a steep challenge in your case. Let the bulb keep gathering energy for now. In late September or early October try to force a dormancy by drying down. Dwindling daylight hours might already be slowing the plant to a crawl anyway. I take it you have no balcony to let it experience seasonal cooling. A windowsill may be the coolest area in your case, but the floor of a closet on an outside wall can do the trick. There may be a utility (furnace) room that vents outdoors and experiences something close to outdoor temperatures…in this case leave in that spot until freezing weather bears down.

      In my climate, freezing conditions often hold off until late October or early November, so I can get at least a few weeks of the cool period accomplished under a covered porch. No matter what, amaryllis will likely still bloom next spring if they have made at least 4 leaves over the past summer; missing out on the cool programming just means leaves may emerge and become long (maybe needing support) before a flower scape emerges.

      Thanks for bringing your question to team Emaryllis 😉

      • Thanks, E! I think the best place will be the windowsill. But will keep watering and feeding for now and stop in early october. The light is already changing up here and I have noticed a slight yellow in some of the leaves (even before I eased up on watering). I always buy one or two new bulbs anyway just so I have some flowers around the holidays and in January.

  5. Great resource, thanks! I own up to being a hippeastrum obsessive – can’t throw one away! Got many babies, and seedlings for the frst time this year. Problem is I have a victorian terrace full of plants and struggle to porovide enough sunlight for my overwintering hippeastrum (they spend the summer in the greenhouse)so I’m investigating extra artificial lighting to keep the leaf growth healthy until I can put them outside in April/May. Any advice or suggestions of where to find out if anyone has experience to share? Thanks B

    • Hey Bernie, the least expensive option is outfitting 48″ wide storage shelving with 48″ fluorescent light fixtures. Cool white bulbs do fine by amaryllises, just keep them close to the foliage, and at least four bulbs under each shelf. There are many more expensive options, LED lights are still pretty expensive, and sodium/halide lamps are bright, but use a lot of energy.

      • Thanks for the suggestion. I’m experimenting with some LED bulbs (2x36w)on a timer that gives the bulbs a longer day after they have flowered until I can get them out in the greenhouse around April/May. The foliage was much healthier last winter so I’ll let you know if I get better flowering overall this year. So far I’ve had bulbs flowering from sep/oct which is great as the flowering season is lengthened and I’m getting one or two on the go most of the time over the last few months instead of getting so many at once that the impact is less and I run out of places to put them. The only downside is that my home office is now pink (LED blue and red light) in the early evening!

        • It sounds like you are doing great, and yes I do the same shuffling routine to try to get a succession of bloom under very limited space constraints! Let us know how you think the LED lights perform, I think there will be better versions with the ability to tune the light temperature so they don’t make your home look as though aliens have taken residence 😉

  6. LOVE your website!!!! Thank you for providing us “Amaryllis Addicts” such extraordinary resources as well as the photo identification pages. I’m hooked:)

    Thanks, and keep up the good work.
    Gwen

Leave a Reply to emaryllis Cancel reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.